Product AppliCATEEEEEEEEion
1. Log grabbing,moving and organizing.
2. Stone grabbing,moving and organizing.
3. Other large scraps grabbing,moving and organizing.
How to choose the grapple model?
1. What is your excavator model or tonnage?
2. What material do you want to grab? Stone, wood, Rubbish or something else?
PC200 PC210 PC220 PC230 PC240 Excavator Attachment Hydraulic Grapple Bucket Rotary Hydraulic Grab Bucket Grapple
| Product name | Hydraulic Rotary Steel Grapple |
| Model | HL200MGY-3 |
| AppliCATEEEEEEEEion model | PC200 PC210 PC220 PC230 PC240 |
| Max. opening width | 2250 mm |
| Rotating oil flow | 30-40L/min |
| Rotating pressure | 100-130Kg/cm2 |
| Operating oil flow | 100-150 L/min |
| Operating pressure | 180-220Kg/cm2 |
| Suitable excavator | 12-18 tons |
| AppliCATEEEEEEEEion | Handling and unloading of wood, stone and steel; laying of medium pipes for urban sewage; modeling operation of river and sea dam,etc. |
Product Maintenance
1.Daily checkpoint: Whether there is any damage or deformation of the body, hose interface leakage, damage to the pin and bushing and its replacement
cycle,check the oil level of the gear, check the bolt and nut, the gear
tightening loose state.
2.Conventional checkpoint: The seals and rotating parts of the hydraulic
cylinder will wear out, and should be replaced in time after reaching the
service life. Replacement parts should be matched with the original factory. Check the rotating shaft in 360 degrees,whether easy to work from any
Angle, check that there is enough lubricant on the rotating shaft and bolts
are tight enough.
3. Check the tightening state of bolts, install new bolts, check 8 hours after
use, and ensure that the tightened bolts are not loose. Damaged bolts
should be replaced in time. Bolts should be replaced after approximately
1500 hours or 12 months of use after installation.
4. It is recommended to check whether there is oil leakage regularly to
ensure that there is no fault and the product can run smoothly. Every 4 hours: fill lubriCATEEEEEEEEing oil, lubriCATEEEEEEEEe shaft pin and rotating gear once;
Every half year or 1000 hours (whichever comes first) : Replace the hydraulic
cylinder oil seal and motor oil seal once.
Our Hydraulic Rotary Steel Grapple Product SpecifiCATEEEEEEEEion
| Model | Unit | HL60MGY | HL150MGY-3 | HL200MGY-3 | HL300MGY |
External
dimension | mm | 1415*630 | 1740*750 | 2440*1255 | 2480*1260 |
Max.
opening
width | mm | 1500 | 1710 | 2250 | 2300 |
Grasp
weight | kg | 1300 | 1400 | 2000 | 2500 |
Rotating
oil flow | L/min | 25-35 | 30-40 | 30-40 | 30-40 |
Rotating
pressure | Kg/cm2 | 80-120 | 90-120 | 100-130 | 100-130 |
Operating
oil flow | L/min | 30-50 | 80-140 | 100-150 | 100-150 |
operating
pressure | Kg/cm2 | 160-220 | 180-220 | 180-220 | 180-220 |
| Weight | kg | 360 | 850 | 1600 | 1800 |
Suitable
excavator | ton | 5-8 | 12-18 | 18-24 | 25-36 |
Product Features
We Can Supply Following Excavator Model Attachments
| PC45MR PC56-7 PC60-7 PC70-8 PC60-6 PC40-7 PC40-8 PC60-2 PC60-5 PC60-6 PC75 |
| PC100-5 PC120-6 PC150-5 PC130-7 PC200-3 PC200-6 PC200-8 PC210LC-8 PC220-8 |
| PC240LC-8 PC300-3 PC300-5 PC300-6 PC300-7 PC360-7 PC400-3 PC400-5 PC600-6 |
| ZX60 ZX70 ZX100M-1 ZX120 EX60 EX60-2 EX60-3 EX60-7 EX100-1 EX120-5 EX120-6 |
| ZX200 ZX200-3 ZX230 ZX240 ZX240-3 EX200-1 EX200-2 EX200-3 EX200-5 EX200-6 |
| EX210-2 EX220-2 EX220-3 EX225-5 EX270 EX300-1 EX300-2 ZX330-3 ZX450H EX300-5 |
| EX450-5 EX550-3 EX700 EX750 EX1100-1 EX1200-5 EX1200-6 EX1800 EX2500-5 |
| E312 E315 E324D E320D E330 E329D E200B E240 E320 E320C |
| R60-7 130 R200-5 R215-7 R225-9 R210W-7 R220-5 R250-7 R260-7 R290-3 R300-5 R375-7 R305-7 R335-7 R300-3 R450 |
| SK07 SK60 SK75 SK60-8 SK120 SK120-3 SK130 SK200-8 SK200-6 SK250-8 SK210-6 |
| SK220-1 SK230-6 SK250-6 SK200-8 SK210-8 SK300-3 SK330-6 |
| DH60-7 DH80-7 DH130 DH215-7 DH215-9 DH220-5 DH220-2 DH220-3 DH225-7 DH280-3 |
| DH150 DH300 DH330-3 DH300-5 DH420LC-7 DH300-7 |
| EC210BLC EC140BLC EC290B EC360B EC210 EC240 |
| SH120 SH75 SH100 S280 S280FA S280F2 S281 S340 S265F2 SH200 SH200A3 |
| HD550 HD450 HD800-7 HD400SEM HD700-2 HD700-5 HD700-7 HD800SD-5 HD900-7 |
| HD820-2 HD820 HD770-1 HD770-2 HD880-1 HD850 HD250 HD400 |
Product Tags:
|
|
PC200 PC210 PC220 PC230 PC240 Excavator Attachment Rotary Hydraulic Grab Bucket Grapple Images
|
